Rental Equipment

Rental Equipment
19 Tesmec 1475XL EVO #21081 Stock # 21081,  Price $1,595,000 Unused machine with only 10 hours, Bucket wheel attachment 630HP Cat C18 Tier 4 Final Max dig depth: 9’ Max dig width: 66” Currently set up with 44” wide buckets, Rotary carbide tip cutters on buckets, 420 Gallon fuel tank 33” wide track pads, Machine weigh 200,000lbs Tractor only : 133,000lbs Bucket Wheel Attachment : 67,000lbs Rental rates: Call $
  • Call /monthly

Stock # 21081,  Price $1,595,000 Unused machine with only 10 hours, Bucket wheel attachment 630HP Cat C18 Tier 4 Final Max dig depth: 9’ Max dig width: 66” Currently set up with 44” wide buckets, Rotary carbide tip cutters on buckets, 420 Gallon fuel tank 33” wide track pads, Machine weigh 200,000lbs Tractor only : 133,000lbs Bucket Wheel Attachment : 67,000lbs Rental rates: Call

View Listing
19 Tesmec 1475XL EVO #21082 Stock # 21082, Sale price $1,295,000 630HP Cat C18 Tier 4 Final, Chain trencher Currently set up for 44” wide x 10’ deep, 420 Gallon fuel tank 33” wide track pads, Machine weighs 230,000lbs Tractor only approximate : 170,000lbs 10′ boom, chain and 44″ plates : 60,000lbs Only 600 original hours, $
  • Call /monthly

Stock # 21082, Sale price $1,295,000 630HP Cat C18 Tier 4 Final, Chain trencher Currently set up for 44” wide x 10’ deep, 420 Gallon fuel tank 33” wide track pads, Machine weighs 230,000lbs Tractor only approximate : 170,000lbs 10′ boom, chain and 44″ plates : 60,000lbs Only 600 original hours,

View Listing
16 Vermeer T955III #22102 Stock #22102, Sale Price $795,000 10’ Dig depth, 30” wide cut, Elevating cab, Dirt drags, 24” wide track pads, 40” end idler, 4501H double chain, Machine weight: 103,000lbs with 6’ boom, 110,000lbs with 10’boom, 415HP Cat Turbo Diesel, Pre Def (no emissions) , $5250
  • 5250 /Daily
  • 15750 /Weekly
  • 47250 /monthly

Stock #22102, Sale Price $795,000 10’ Dig depth, 30” wide cut, Elevating cab, Dirt drags, 24” wide track pads, 40” end idler, 4501H double chain, Machine weight: 103,000lbs with 6’ boom, 110,000lbs with 10’boom, 415HP Cat Turbo Diesel, Pre Def (no emissions) ,

View Listing
20 John Deere 850L XLT #23062 Stock #23062, Sale Price $325,000 Cab with A/C and heat, 10’ 9” wide semi u blade, 3 shank ripper, Limb risers / sweeps, Cab screens, 225HP Turbo Diesel Machine weighs: 54,000lbs 24” wide track pads, 116 Gallon fuel tank, $1200
  • 1200 /Daily
  • 3600 /Weekly
  • 10800 /monthly

Stock #23062, Sale Price $325,000 Cab with A/C and heat, 10’ 9” wide semi u blade, 3 shank ripper, Limb risers / sweeps, Cab screens, 225HP Turbo Diesel Machine weighs: 54,000lbs 24” wide track pads, 116 Gallon fuel tank,

View Listing
13 Vermeer T655 #21087 Stock # 21087,  Sale price $290,000 2013 Vermeer T655 Commander lll Cab with A/C and Heat, 8’ deep cut, Set up for 24” wide cut, Auto greaser, Hydraulic Cumber lift, Machine leveling option, Tilting tracks, Folding discharge conveyor, Dirt drags, 250HP John Deere Turbo diesel, Machine weighs:  62,000lbs   $3000
  • 3000 /Daily
  • 9000 /Weekly
  • 27000 /monthly

Stock # 21087,  Sale price $290,000 2013 Vermeer T655 Commander lll Cab with A/C and Heat, 8’ deep cut, Set up for 24” wide cut, Auto greaser, Hydraulic Cumber lift, Machine leveling option, Tilting tracks, Folding discharge conveyor, Dirt drags, 250HP John Deere Turbo diesel, Machine weighs:  62,000lbs  

View Listing
17 Volvo A25G #23067 Stock #23067, Sale Price $290,000 25Ton Cap, With tailgate, 20Yd heaped Cap, 315HP Volvo D11M Turbo Diesel, 100 Gallon fuel tank, 23.5-R25 Tires, Machine empty weight: 55,000lbs Machine width, 9’7” $1000
  • 1000 /Daily
  • 3000 /Weekly
  • 9000 /monthly

Stock #23067, Sale Price $290,000 25Ton Cap, With tailgate, 20Yd heaped Cap, 315HP Volvo D11M Turbo Diesel, 100 Gallon fuel tank, 23.5-R25 Tires, Machine empty weight: 55,000lbs Machine width, 9’7”

View Listing
17 CAT D6T XW #22150 Stock #22150, Sale Price $290,000 Cab with A/C and heat, Semi U blade 11’ 8” wide, 3 shank rear ripper, Sweeps/limb risers, 215HP Cat C9.3 Turbo Diesel, 30” pads, Pre-wired for grade control, System one UC, Machine weight: 53,000lbs $1200
  • 1200 /Daily
  • 3600 /Weekly
  • 10800 /monthly

Stock #22150, Sale Price $290,000 Cab with A/C and heat, Semi U blade 11’ 8” wide, 3 shank rear ripper, Sweeps/limb risers, 215HP Cat C9.3 Turbo Diesel, 30” pads, Pre-wired for grade control, System one UC, Machine weight: 53,000lbs

View Listing
14 John Deere 370E #22147 Stock #22147, Sale Price $260,000 37 Ton Cap, With Tailgate, 21Yd Struck Cap, 28yd heaped cap, Bed liners, Heated bed, Power mirrors, 422HP John Deere 13.5L Turbo Diesel, 29.5-R25 Tires, 160 Gallon fuel tank, Machine empty weight: 75,000lbs $1400
  • 1400 /Daily
  • 4200 /Weekly
  • 12600 /monthly

Stock #22147, Sale Price $260,000 37 Ton Cap, With Tailgate, 21Yd Struck Cap, 28yd heaped cap, Bed liners, Heated bed, Power mirrors, 422HP John Deere 13.5L Turbo Diesel, 29.5-R25 Tires, 160 Gallon fuel tank, Machine empty weight: 75,000lbs

View Listing
22 John Deere 544P #23065 Stock #23065, Sale Price $245,000 Cab with AC and heat, JRB quick coupler, Auxiliary hydraulics / 3rd valve, Ride control / boom suspension,, 3 yard GP bucket, 100” wide bucket, 174HP Turbo Diesel, 20.5R25 Bridgestone tires, Machine weight: 31,500lbs, Forks available for additional cost, $600
  • 600 /Daily
  • 1800 /Weekly
  • 5400 /monthly

Stock #23065, Sale Price $245,000 Cab with AC and heat, JRB quick coupler, Auxiliary hydraulics / 3rd valve, Ride control / boom suspension,, 3 yard GP bucket, 100” wide bucket, 174HP Turbo Diesel, 20.5R25 Bridgestone tires, Machine weight: 31,500lbs, Forks available for additional cost,

View Listing
18 Vermeer RTX1250 #22090 Stock #22090, Sale Price $240,000 Hydra wheel Rock saw attachment 46” Max depth cut Quad track 125 HP Cummins turbo diesel Front 6 way blade Seat rotator Creep control Larger front weight kit Machine weighs 28,000lbs $1000
  • 1000 /Daily
  • 4000 /Weekly
  • 12000 /monthly

Stock #22090, Sale Price $240,000 Hydra wheel Rock saw attachment 46” Max depth cut Quad track 125 HP Cummins turbo diesel Front 6 way blade Seat rotator Creep control Larger front weight kit Machine weighs 28,000lbs

View Listing
22 John Deere 524P #23066 Stock #23066, Sale Price $225,000 Cab with AC and heat, JRB quick coupler, Auxiliary hydraulics / 3rd valve, Ride control / boom suspension,, 2.75yard GP bucket, 100” wide bucket, 161HP Turbo Diesel, 20.5R25 Bridgestone tires, Machine weight: 29,500lbs, Forks available for additional cost, $550
  • 550 /Daily
  • 1650 /Weekly
  • 4950 /monthly

Stock #23066, Sale Price $225,000 Cab with AC and heat, JRB quick coupler, Auxiliary hydraulics / 3rd valve, Ride control / boom suspension,, 2.75yard GP bucket, 100” wide bucket, 161HP Turbo Diesel, 20.5R25 Bridgestone tires, Machine weight: 29,500lbs, Forks available for additional cost,

View Listing
18 CAT 336F L #22173 Stock #22173, Sale Price $225,000 Quick coupler / pin grabber, Aux Hydraulics, 12’10” stick, Backup camera, Air ride seat, Straight travel pedal 60” bucket, 314HP Turbo Caterpillar C9.3 Engine, Triple Grouser Track Shoes, 33.5” wide tracks, Machine weighs 85,000lbs $1000
  • 1000 /Daily
  • 3000 /Weekly
  • 9000 /monthly

Stock #22173, Sale Price $225,000 Quick coupler / pin grabber, Aux Hydraulics, 12’10” stick, Backup camera, Air ride seat, Straight travel pedal 60” bucket, 314HP Turbo Caterpillar C9.3 Engine, Triple Grouser Track Shoes, 33.5” wide tracks, Machine weighs 85,000lbs

View Listing
17 John Deere 644K #22080 Stock # 22080,  Sale price $220,000 Cab with AC and heat, JRB quick coupler, Ride control / boom suspension, Backup camera, 4.25yard GP bucket, 120” wide bucket, 232HP Turbo Diesel, Machine weight: 42,000lbs, Forks available for additional cost,   $800
  • 800 /Daily
  • 2400 /Weekly
  • 7200 /monthly

Stock # 22080,  Sale price $220,000 Cab with AC and heat, JRB quick coupler, Ride control / boom suspension, Backup camera, 4.25yard GP bucket, 120” wide bucket, 232HP Turbo Diesel, Machine weight: 42,000lbs, Forks available for additional cost,  

View Listing
17 Terex TA400 #22123 Stock #22123, Sale Price $210,000 40Ton Cap, 22Yd Struck Cap, 30yd heaped cap, 444HP Scania DC13 Turbo Diesel, 29.5-R25 Tires, 130 Gallon fuel tank, Machine empty weight: 70,000lbs $1400
  • 1400 /Daily
  • 4200 /Weekly
  • 12600 /monthly

Stock #22123, Sale Price $210,000 40Ton Cap, 22Yd Struck Cap, 30yd heaped cap, 444HP Scania DC13 Turbo Diesel, 29.5-R25 Tires, 130 Gallon fuel tank, Machine empty weight: 70,000lbs

View Listing
17 John Deere 750K LGP #22041 Stock #22041,   Sale Price $190,000 Cab with AC and heat 13’ wide 6 way blade, 33.5” wide track pads, Sweeps/limb risers, Side and rear screens, Machine weighs 44,000lbs 165HP Turbo Diesel,   $800
  • 800 /Daily
  • 2400 /Weekly
  • 7200 /monthly

Stock #22041,   Sale Price $190,000 Cab with AC and heat 13’ wide 6 way blade, 33.5” wide track pads, Sweeps/limb risers, Side and rear screens, Machine weighs 44,000lbs 165HP Turbo Diesel,  

View Listing
19 John Deere 210G LC #22129 Stock #22129, Sale Price $182,000 Hydraulic Q/C pin grabber, Dual purpose Aux Hydraulics, Control pattern changer, Reversing fan, 9’ 6” stick, Backup camera, Heated seat, Additional work lights 159HP Turbo diesel, Machine weighs : 56,000lbs, Machine width 10’ 6” $600
  • 600 /Daily
  • 1800 /Weekly
  • 6300 /monthly

Stock #22129, Sale Price $182,000 Hydraulic Q/C pin grabber, Dual purpose Aux Hydraulics, Control pattern changer, Reversing fan, 9’ 6” stick, Backup camera, Heated seat, Additional work lights 159HP Turbo diesel, Machine weighs : 56,000lbs, Machine width 10’ 6”

View Listing
20 John Deere 700K #23057 Stock #23057, Sale Price $179,000 Cab with A/C and heat, Rear multi shank ripper, 6 way blade, 11’ wide blade, 125HP John Deere Turbo diesel 24” wide track pads, (30” LGP track pads can be installed on this machine) 75 Gallon fuel tank, Weights 35,000lbs, $700
  • 700 /Daily
  • 2100 /Weekly
  • 6300 /monthly

Stock #23057, Sale Price $179,000 Cab with A/C and heat, Rear multi shank ripper, 6 way blade, 11’ wide blade, 125HP John Deere Turbo diesel 24” wide track pads, (30” LGP track pads can be installed on this machine) 75 Gallon fuel tank, Weights 35,000lbs,

View Listing
13 John Deere 672G #21071 Stock# 21071, Sale price $172,000 14’ MB, 6 wheel drive Rear ripper/scarifier, Front push block, 255HP Turbo Diesel, Machine weights: 44,000lbs, 17.5/R25  tires, 8 speed forward and 8 speed reverse, Standard lever controls, Enclosed cab with A/C and heat,   $800
  • 800 /Daily
  • 2400 /Weekly
  • 7200 /monthly

Stock# 21071, Sale price $172,000 14’ MB, 6 wheel drive Rear ripper/scarifier, Front push block, 255HP Turbo Diesel, Machine weights: 44,000lbs, 17.5/R25  tires, 8 speed forward and 8 speed reverse, Standard lever controls, Enclosed cab with A/C and heat,  

View Listing
19 John Deere 210G LC #22130 Stock #22130, Sale Price $170,000 Hydraulic Q/C pin grabber, Dual purpose Aux Hydraulics, Control pattern changer, Reversing fan, 9’ 6” stick, Backup camera, Heated seat, Additional work lights 159HP Turbo diesel, Machine weighs : 56,000lbs, Machine width 10’ 6”, $600
  • 600 /Daily
  • 1800 /Weekly
  • 6300 /monthly

Stock #22130, Sale Price $170,000 Hydraulic Q/C pin grabber, Dual purpose Aux Hydraulics, Control pattern changer, Reversing fan, 9’ 6” stick, Backup camera, Heated seat, Additional work lights 159HP Turbo diesel, Machine weighs : 56,000lbs, Machine width 10’ 6”,

View Listing
15 Deere 672G #21103 Stock #21103,  Sale price $170,000 14’ MB, 6 wheel drive Rear ripper/scarifier, Front push block, 255HP Turbo Diesel, Machine weights: 44,000lbs, 14.00/R24  tires, 8 speed forward and 8 speed reverse, Standard lever controls, Enclosed cab with A/C and heat, wider 17.5R25 tires and rims available   $800
  • 800 /Daily
  • 2400 /Weekly
  • 7200 /monthly

Stock #21103,  Sale price $170,000 14’ MB, 6 wheel drive Rear ripper/scarifier, Front push block, 255HP Turbo Diesel, Machine weights: 44,000lbs, 14.00/R24  tires, 8 speed forward and 8 speed reverse, Standard lever controls, Enclosed cab with A/C and heat, wider 17.5R25 tires and rims available  

View Listing
16 John Deere 350G #21068 Stock #21068, Sale Price $168,000 Cab with A/C and heat, Control pattern changer, Auxiliary hydraulics, 48” bucket, 13’ 1” stick, 32” triple bar grousers, Machine weight: 80,000lbs $900
  • 900 /Daily
  • 2700 /Weekly
  • 8100 /monthly

Stock #21068, Sale Price $168,000 Cab with A/C and heat, Control pattern changer, Auxiliary hydraulics, 48” bucket, 13’ 1” stick, 32” triple bar grousers, Machine weight: 80,000lbs

View Listing
15 John Deere 700K #23012 Stock #23012, Sale Price $165,000 Cab with A/C and heat, Rear multi shank ripper, 6 way blade, 10’ wide blade, 125HP John Deere Turbo diesel 22” wide track pads, 75 Gallon fuel tank, Weights 35,000lbs, $700
  • 700 /Daily
  • 2100 /Weekly
  • 6300 /monthly

Stock #23012, Sale Price $165,000 Cab with A/C and heat, Rear multi shank ripper, 6 way blade, 10’ wide blade, 125HP John Deere Turbo diesel 22” wide track pads, 75 Gallon fuel tank, Weights 35,000lbs,

View Listing
19 John Deere 450K #22060 Stock # 22060,  Sale price $130,000 Cab with AC and heat, Multi shank ripper, 8’9” wide blade, 16” pads, Machine weighs 19,000lbs 80HP Turbo diesel, 53 Gallon fuel tank, $450
  • 450 /Daily
  • 1350 /Weekly
  • 4050 /monthly

Stock # 22060,  Sale price $130,000 Cab with AC and heat, Multi shank ripper, 8’9” wide blade, 16” pads, Machine weighs 19,000lbs 80HP Turbo diesel, 53 Gallon fuel tank,

View Listing
17 John Deere 135G #22037 Stock # 22037, Sale Price $129,000 Zero tail swing, Hydraulic Pin grabber Q/C, Aux Hydraulics, Control pattern changer Backup camera, 23.5” track pads, 101HP Isuzu Turbo diesel, Machine weighs; 31,000lbs, Machine width 8’6”, 58 Gallon fuel tank,   $550
  • 550 /Daily
  • 1650 /Weekly
  • 4950 /monthly

Stock # 22037, Sale Price $129,000 Zero tail swing, Hydraulic Pin grabber Q/C, Aux Hydraulics, Control pattern changer Backup camera, 23.5” track pads, 101HP Isuzu Turbo diesel, Machine weighs; 31,000lbs, Machine width 8’6”, 58 Gallon fuel tank,  

View Listing
13 Vermeer RTX750 #20101 Stock #20101, Sale Price $120,000 Hydrawheel rock saw attachment, 30” max depth cut, 6” wide cut, Hydraulic side shift, Front weight kit, Front back fill blade, Machine weighs: 13,000lbs 74HP Turbo diesel, 4 wheel steer 4 wheel drive $550
  • 550 /Daily
  • 2200 /Weekly
  • 6600 /monthly

Stock #20101, Sale Price $120,000 Hydrawheel rock saw attachment, 30” max depth cut, 6” wide cut, Hydraulic side shift, Front weight kit, Front back fill blade, Machine weighs: 13,000lbs 74HP Turbo diesel, 4 wheel steer 4 wheel drive

View Listing
14 John Deere 250G LC #21074 Stock # 21074, Sale price $118,000 AUX lines, Hydraulic coupler Control pattern changer, 188HP Turbo Diesel 24” wide pads,   $650
  • 650 /Daily
  • 1950 /Weekly
  • 5850 /monthly

Stock # 21074, Sale price $118,000 AUX lines, Hydraulic coupler Control pattern changer, 188HP Turbo Diesel 24” wide pads,  

View Listing
15 Cat D5K2 #22026 Stock # 22026,  Sale price $105,000 Multi shank ripper, 9’6” wide 6 way blade, Sweeps/ limb risers, Side and rear screens, 105HP Turbo diesel, Machine weighs 22,000lbs 20” track pads,   $550
  • 550 /Daily
  • 1650 /Weekly
  • 4950 /monthly

Stock # 22026,  Sale price $105,000 Multi shank ripper, 9’6” wide 6 way blade, Sweeps/ limb risers, Side and rear screens, 105HP Turbo diesel, Machine weighs 22,000lbs 20” track pads,  

View Listing
17 John Deere 450K #23053 Stock #23053, Sale Price $88,000 Rear rippers, 6 way blade 8’9” wide, 16” wide track pads, 80HP John Deere turbo diesel, Machine weighs: 21,000lbs $425
  • 425 /Daily
  • 1275 /Weekly
  • 3825 /monthly

Stock #23053, Sale Price $88,000 Rear rippers, 6 way blade 8’9” wide, 16” wide track pads, 80HP John Deere turbo diesel, Machine weighs: 21,000lbs

View Listing
12 International 7400 Water Truck #22151 Stock #22151, Sale Price $87,000 4000 Gallon water tank, Front, rear, left, right side sprayers, Rear dump/drip bar, Rear hose real, Alum outer wheels, 300 HP International Maxx force turbo diesel, 8 speed Eaton Fuller manual transmission, Spring suspension, Air ride cab, 196 in Wheelbase, 56,000GVW 41,000 miles $700
  • 700 /Daily
  • 2100 /Weekly
  • 6300 /monthly

Stock #22151, Sale Price $87,000 4000 Gallon water tank, Front, rear, left, right side sprayers, Rear dump/drip bar, Rear hose real, Alum outer wheels, 300 HP International Maxx force turbo diesel, 8 speed Eaton Fuller manual transmission, Spring suspension, Air ride cab, 196 in Wheelbase, 56,000GVW 41,000 miles

View Listing
19 Bobcat E85 #23035 Stock #23035, Sale Price $86,000 Cab with A/C and heat, Hydraulic thumb, Keyless start panel, Rubber tracks, 65HP Turbo diesel, Machine weigh: 19,000lbs $425
  • 425 /Daily
  • 1275 /Weekly
  • 3825 /monthly

Stock #23035, Sale Price $86,000 Cab with A/C and heat, Hydraulic thumb, Keyless start panel, Rubber tracks, 65HP Turbo diesel, Machine weigh: 19,000lbs

View Listing
19 Bobcat E85 #22109 Stock #22109, Sale Price $81,000 Cab with A/C and heat, Hydraulic thumb, Hydraulic quick coupler, Rubber tracks, 65HP Turbo diesel, Machine weigh: 19,500lbs $425
  • 425 /Daily
  • 1275 /Weekly
  • 3825 /monthly

Stock #22109, Sale Price $81,000 Cab with A/C and heat, Hydraulic thumb, Hydraulic quick coupler, Rubber tracks, 65HP Turbo diesel, Machine weigh: 19,500lbs

View Listing
15 John Deere 550K XLT #22089 Stock #22089, Sale Price $78,000 Rear rippers, 6 way blade 8’9” wide, 18” wide track pads, 92HP John Deere turbo diesel, Machine weighs: 21,000lbs $500
  • 500 /Daily
  • 1500 /Weekly
  • 4500 /monthly

Stock #22089, Sale Price $78,000 Rear rippers, 6 way blade 8’9” wide, 18” wide track pads, 92HP John Deere turbo diesel, Machine weighs: 21,000lbs

View Listing
15 Ditch Witch RT100 #22115 Stock #22115, Sale Price $78,000 Mechanical M910 trencher, 60” deep cut X 8” wide cut with dirt cups, Hydraulic trench cleaner, A920 Backhoe, 6 way backfill blade, Machine leveling left to right option, 100HP Deutz turbo diesel, 38 X 18.00 X 20 tires, Machine weighs 14,000lbs, $

Stock #22115, Sale Price $78,000 Mechanical M910 trencher, 60” deep cut X 8” wide cut with dirt cups, Hydraulic trench cleaner, A920 Backhoe, 6 way backfill blade, Machine leveling left to right option, 100HP Deutz turbo diesel, 38 X 18.00 X 20 tires, Machine weighs 14,000lbs,

View Listing
18 Bobcat T870 #20098 Stock #20098, Sale Price $75,000 Cab with A/C and heat, High flow, 2 speed, Deluxe Keyless start, SJC joystick controls, Power bobtach, Bucket positioning, Suspension seat, Torsion suspension, 100HP turbo diesel, Machine is 84” wide, Machine weights: 13,000lbs $400
  • 400 /Daily
  • 1200 /Weekly
  • 3600 /monthly

Stock #20098, Sale Price $75,000 Cab with A/C and heat, High flow, 2 speed, Deluxe Keyless start, SJC joystick controls, Power bobtach, Bucket positioning, Suspension seat, Torsion suspension, 100HP turbo diesel, Machine is 84” wide, Machine weights: 13,000lbs

View Listing
18 Bobcat T870 #20095 Stock #20095, Sale Price $74,000 Cab with A/C and heat, High flow, 2 speed, Deluxe Keyless start, SJC joystick controls, Automatic ride control/boom suspension, Power bobtach, Suspension seat, Torsion suspension, 100HP turbo diesel, Machine is 84” wide, Machine weights: 13,000lbs, $400
  • 400 /Daily
  • 1200 /Weekly
  • 3600 /monthly

Stock #20095, Sale Price $74,000 Cab with A/C and heat, High flow, 2 speed, Deluxe Keyless start, SJC joystick controls, Automatic ride control/boom suspension, Power bobtach, Suspension seat, Torsion suspension, 100HP turbo diesel, Machine is 84” wide, Machine weights: 13,000lbs,

View Listing
17 CAT 299D2 XHP #22184 Stock #22184, Sale Price $73,000 Cab with AC and heat, XHP high flow, Max 40GPM Max 4060 PSI Auxiliary hydraulic cooler, 2 speed, Air ride seat, Back up camera, Rear counter weights, 15.5” wide tracks, 32 Gallon fuel tank, 106 HP Cat C3.8 DIT Turbo diesel Machine weighs 11,800lbs, $400
  • 400 /Daily
  • 1200 /Weekly
  • 3600 /monthly

Stock #22184, Sale Price $73,000 Cab with AC and heat, XHP high flow, Max 40GPM Max 4060 PSI Auxiliary hydraulic cooler, 2 speed, Air ride seat, Back up camera, Rear counter weights, 15.5” wide tracks, 32 Gallon fuel tank, 106 HP Cat C3.8 DIT Turbo diesel Machine weighs 11,800lbs,

View Listing
19 Bobcat T870 #22106 Stock #22106, Sale Price $71,000 Cab with A/C and heat, High flow, 2 speed, Deluxe Keyless start, SJC joystick controls, Power bobtach, Bucket positioning, Reversing fan, Automatic ride control, Suspension seat, Torsion suspension, 100HP turbo diesel Machine is 84″ wide Machine weighs: 13,000 lbs $400
  • 400 /Daily
  • 1200 /Weekly
  • 3600 /monthly

Stock #22106, Sale Price $71,000 Cab with A/C and heat, High flow, 2 speed, Deluxe Keyless start, SJC joystick controls, Power bobtach, Bucket positioning, Reversing fan, Automatic ride control, Suspension seat, Torsion suspension, 100HP turbo diesel Machine is 84″ wide Machine weighs: 13,000 lbs

View Listing
22 Bobcat T66 #23072 Stock #23072, Sale Price $71,000 Cab with AC and heat, 2 speed, Power bobtach, Air ride and heated seat, Foot controls Touch screen start panel, 74HP Turbo Diesel, 12” wide tracks, 68” wide bucket, Machine weighs: 9000lbs Rated lift cap: 2450lbs, 28 gallon fuel tank, $300
  • 300 /Daily
  • 900 /Weekly
  • 2700 /monthly

Stock #23072, Sale Price $71,000 Cab with AC and heat, 2 speed, Power bobtach, Air ride and heated seat, Foot controls Touch screen start panel, 74HP Turbo Diesel, 12” wide tracks, 68” wide bucket, Machine weighs: 9000lbs Rated lift cap: 2450lbs, 28 gallon fuel tank,

View Listing
21 Bobcat T740 #23049 Stock #23049, Sale Price $70,000 Cab with AC and heat, SJC Joystick controls, 2 speed, Power bobtach, Deluxe keyless panel, Reversing fan, Automatic ride control / boom suspension, Backup camera, Air ride seat, Radio, 74HP Turbo Diesel, Suspension seat, $350
  • 350 /Daily
  • 1050 /Weekly
  • 3150 /monthly

Stock #23049, Sale Price $70,000 Cab with AC and heat, SJC Joystick controls, 2 speed, Power bobtach, Deluxe keyless panel, Reversing fan, Automatic ride control / boom suspension, Backup camera, Air ride seat, Radio, 74HP Turbo Diesel, Suspension seat,

View Listing
15 Cat 308E2 CR #22019 Stock #22019,   Sale price $69,000 AC cab, Hydraulic main pin thumb, Aux hydraulics, Manual Wain Roy style quick coupler, Bolt on rubber road liner pads, 65HP Turbo diesel, Machine weighs 17,500lbs   $425
  • 425 /Daily
  • 1275 /Weekly
  • 3825 /monthly

Stock #22019,   Sale price $69,000 AC cab, Hydraulic main pin thumb, Aux hydraulics, Manual Wain Roy style quick coupler, Bolt on rubber road liner pads, 65HP Turbo diesel, Machine weighs 17,500lbs  

View Listing
18 Dynapac CA2500D #23058 Stock #23058, Sale Price $69,000 84” Vibratory Smooth drum, 132HP Cummins Turbo Diesel, Machine weighs: 23,000lbs 72 Gallon fuel tank $500
  • 500 /Daily
  • 1500 /Weekly
  • 4500 /monthly

Stock #23058, Sale Price $69,000 84” Vibratory Smooth drum, 132HP Cummins Turbo Diesel, Machine weighs: 23,000lbs 72 Gallon fuel tank

View Listing
20 Bobcat T76 #22175 Stock #22175, Sale Price $69,000 Cab A/C and heat, Power bobtach, SJC joystick controls, Deluxe Keyless start panel, Bucket positioning, 74HP Turbo Diesel, Suspension seat, Machine weighs 10,500lbs, 78” wide bucket, $325
  • 325 /Daily
  • 975 /Weekly
  • 2925 /monthly

Stock #22175, Sale Price $69,000 Cab A/C and heat, Power bobtach, SJC joystick controls, Deluxe Keyless start panel, Bucket positioning, 74HP Turbo Diesel, Suspension seat, Machine weighs 10,500lbs, 78” wide bucket,

View Listing
20 Bobcat T740 #23045 Stock #23045, Sale Price $68,000 Cab with AC and heat, SJC Joystick controls, 2 speed, Power bobtach, Deluxe keyless panel, Reversing fan, Automatic ride control / boom suspension, Backup camera, Air ride seat, Radio, 74HP Turbo Diesel, Suspension seat, $350
  • 350 /Daily
  • 1050 /Weekly
  • 3150 /monthly

Stock #23045, Sale Price $68,000 Cab with AC and heat, SJC Joystick controls, 2 speed, Power bobtach, Deluxe keyless panel, Reversing fan, Automatic ride control / boom suspension, Backup camera, Air ride seat, Radio, 74HP Turbo Diesel, Suspension seat,

View Listing
21 Bobcat T76 #23033 Stock #23033, Sale Price $65,000 Cab A/C and heat, Power bobtach, SJC joystick controls, Deluxe Keyless start panel, 74HP Turbo Diesel, Suspension seat, Machine weighs 10,500lbs, 78” wide bucket, $325
  • 325 /Daily
  • 975 /Weekly
  • 2925 /monthly

Stock #23033, Sale Price $65,000 Cab A/C and heat, Power bobtach, SJC joystick controls, Deluxe Keyless start panel, 74HP Turbo Diesel, Suspension seat, Machine weighs 10,500lbs, 78” wide bucket,

View Listing
22 Bobcat T66 #23055 Stock #23055, Sale Price $64,000 Foot controls Open cab, Keyless start panel, 74HP Turbo Diesel, 12” wide tracks, 68” wide bucket, Machine weighs: 9000lbs Rated lift cap: 2450lbs, 28 gallon fuel tank $275
  • 275 /Daily
  • 825 /Weekly
  • 2475 /monthly

Stock #23055, Sale Price $64,000 Foot controls Open cab, Keyless start panel, 74HP Turbo Diesel, 12” wide tracks, 68” wide bucket, Machine weighs: 9000lbs Rated lift cap: 2450lbs, 28 gallon fuel tank

View Listing
22 Bobcat T66 #23054 Stock #23054, Sale Price $64,000 Foot controls Open cab, Keyless start panel, 74HP Turbo Diesel, 12” wide tracks, 68” wide bucket, Machine weighs: 9000lbs Rated lift cap: 2450lbs, 28 gallon fuel tank $275
  • 275 /Daily
  • 825 /Weekly
  • 2475 /monthly

Stock #23054, Sale Price $64,000 Foot controls Open cab, Keyless start panel, 74HP Turbo Diesel, 12” wide tracks, 68” wide bucket, Machine weighs: 9000lbs Rated lift cap: 2450lbs, 28 gallon fuel tank

View Listing
21 Bobcat T740 #23032 Stock #23032, Sale Price $64,000 Cab with AC and heat, High flow SJC Joystick controls, 2 speed, Power bobtach, Deluxe keyless panel, Air ride seat, Roof guard, Rear taillight protector, Radio, 74HP Turbo Diesel, Suspension seat, $350
  • 350 /Daily
  • 1050 /Weekly
  • 3150 /monthly

Stock #23032, Sale Price $64,000 Cab with AC and heat, High flow SJC Joystick controls, 2 speed, Power bobtach, Deluxe keyless panel, Air ride seat, Roof guard, Rear taillight protector, Radio, 74HP Turbo Diesel, Suspension seat,

View Listing
13 Ford F750 Water Truck #22152 Stock #22152, Sale Price $64,000 2000 gallon water tank, Front, rear and left side sprayers, Rear hose reel, PTO driven pump, 200HP 6.7 Cummins Turbo Diesel, 6 speed manual trans, Alum outer wheels, Air brakes, 25,999GVW 10,500miles $500
  • 500 /Daily
  • 1500 /Weekly
  • 4500 /monthly

Stock #22152, Sale Price $64,000 2000 gallon water tank, Front, rear and left side sprayers, Rear hose reel, PTO driven pump, 200HP 6.7 Cummins Turbo Diesel, 6 speed manual trans, Alum outer wheels, Air brakes, 25,999GVW 10,500miles

View Listing
13 Ford F750 Water Truck #22148 Stock #22148, Sale Price $64,000 2000 gallon water tank, Front, rear and left side sprayers, Rear hose reel, PTO driven pump, 299HP 6.7 Cummins Turbo Diesel, 6 speed manual trans, Alum outer wheels, 25,999GVW 8,500miles $500
  • 500 /Daily
  • 1500 /Weekly
  • 4500 /monthly

Stock #22148, Sale Price $64,000 2000 gallon water tank, Front, rear and left side sprayers, Rear hose reel, PTO driven pump, 299HP 6.7 Cummins Turbo Diesel, 6 speed manual trans, Alum outer wheels, 25,999GVW 8,500miles

View Listing
15 John Deere 550K LGP #22051 Stock # 22051, Sale price…$63,000 9’7” wide blade, 24” pads, Machine weighs 21,000lbs 92HP Turbo diesel,   $450
  • 450 /Daily
  • 1350 /Weekly
  • 4050 /monthly

Stock # 22051, Sale price…$63,000 9’7” wide blade, 24” pads, Machine weighs 21,000lbs 92HP Turbo diesel,  

View Listing
19 Bobcat T770 #23031 Stock #23031, Sale Price $63,000 Cab with AC and heat, High flow, 2 speed, SJC joystick controls, Power bobtach, Reversing fan, Automatic ride control / boom suspension, Air ride and heated seat, Deluxe keyless panel, Bucket positioning, 92HP Turbo Diesel, Suspension seat, Machine weighs 10,500lbs $350
  • 350 /Daily
  • 1050 /Weekly
  • 3150 /monthly

Stock #23031, Sale Price $63,000 Cab with AC and heat, High flow, 2 speed, SJC joystick controls, Power bobtach, Reversing fan, Automatic ride control / boom suspension, Air ride and heated seat, Deluxe keyless panel, Bucket positioning, 92HP Turbo Diesel, Suspension seat, Machine weighs 10,500lbs

View Listing
19 Bobcat T770 #23016 Stock #23016, Sale Price $62,000 Cab with AC and heat, High flow, Standard foot controls, Power bobtach, Reversing fan, Deluxe keyless panel, Bucket positioning, 92HP Turbo Diesel, Suspension seat, Machine weighs 10,500lbs $350
  • 350 /Daily
  • 1050 /Weekly
  • 3150 /monthly

Stock #23016, Sale Price $62,000 Cab with AC and heat, High flow, Standard foot controls, Power bobtach, Reversing fan, Deluxe keyless panel, Bucket positioning, 92HP Turbo Diesel, Suspension seat, Machine weighs 10,500lbs

View Listing
17 Cat H160E S Hydraulic Breaker #UA22117 Stock #UA22117, Sale Price $62,000 Energy Class : 8,500lb Actual weight: 7350lbs, 6.28” Tool / chisel, Auto greaser, Impact Frequency: 400-505  bpm Stick pin: 100mm Link pin: 90mm Space between pin bosses: 15.25” Center to center of pins: 19.5” Rated Flow: 58 GPM to 79 GPM Minimum Operating Pressure: 2176 PSI  to 2321 PSI $1000
  • 1000 /Daily
  • 3000 /Weekly
  • 9000 /monthly

Stock #UA22117, Sale Price $62,000 Energy Class : 8,500lb Actual weight: 7350lbs, 6.28” Tool / chisel, Auto greaser, Impact Frequency: 400-505  bpm Stick pin: 100mm Link pin: 90mm Space between pin bosses: 15.25” Center to center of pins: 19.5” Rated Flow: 58 GPM to 79 GPM Minimum Operating Pressure: 2176 PSI  to 2321 PSI

View Listing
22 Bobcat S770 #23013 Stock #23013, Sale Price $61,000 Cab A/C and heat, High flow auxiliary hydraulics, 2 speed, Power bobtach, SJC joystick controls, Bucket positioning, Automatic ride control / boom suspension, 92HP Turbo Diesel, Suspension seat $325
  • 325 /Daily
  • 975 /Weekly
  • 2925 /monthly

Stock #23013, Sale Price $61,000 Cab A/C and heat, High flow auxiliary hydraulics, 2 speed, Power bobtach, SJC joystick controls, Bucket positioning, Automatic ride control / boom suspension, 92HP Turbo Diesel, Suspension seat

View Listing
19 Bobcat T770 #22057 Stock #22057,  Sale price..$61,000 Cab with AC and heat, SJC Joystick controls, High flow, 2 speed, Power bobtach, Deluxe keyless panel, Bucket positioning, Auto ride control / boom suspension, 92HP Turbo Diesel, Suspension seat,   $350
  • 350 /Daily
  • 1050 /Weekly
  • 3150 /monthly

Stock #22057,  Sale price..$61,000 Cab with AC and heat, SJC Joystick controls, High flow, 2 speed, Power bobtach, Deluxe keyless panel, Bucket positioning, Auto ride control / boom suspension, 92HP Turbo Diesel, Suspension seat,  

View Listing
14 Vactron LP533SDT Heavy #22170 Stock #22170, Sale Price $59,000 49HP Yanmar diesel, 1000 CFM vacuum, 500 Gallon Debris tank, 2 – 150 gallon fresh water tanks (total 300gallons), 4 gallon / 3000psi pressure washer, Hot water burner, Hydraulic jack stand, Electric brakes, 14,000 GVW new Yanmar engine installed at 2399 hours, costed $16,000 $450
  • 450 /Daily
  • 1350 /Weekly
  • 4050 /monthly

Stock #22170, Sale Price $59,000 49HP Yanmar diesel, 1000 CFM vacuum, 500 Gallon Debris tank, 2 – 150 gallon fresh water tanks (total 300gallons), 4 gallon / 3000psi pressure washer, Hot water burner, Hydraulic jack stand, Electric brakes, 14,000 GVW new Yanmar engine installed at 2399 hours, costed $16,000

View Listing
14 Vactron LP573SDT #22138 Stock #22138, Sale Price $58,000 49HP Yanmar diesel, 500-gallon spoil tank, 1000 CFM vacuum, 200 Gallon fresh water capacity Reverse Flow 3000 PSI Pressure Water Electric brakes, 12,000lb GWR Trailer Hyd Door latch, $450
  • 450 /Daily
  • 1350 /Weekly
  • 4050 /monthly

Stock #22138, Sale Price $58,000 49HP Yanmar diesel, 500-gallon spoil tank, 1000 CFM vacuum, 200 Gallon fresh water capacity Reverse Flow 3000 PSI Pressure Water Electric brakes, 12,000lb GWR Trailer Hyd Door latch,

View Listing
21 Bobcat T770 #23050 Stock #23050, Sale Price $58,000 Foot controls 2 speed, Open cab, Bucket positioning, 92HP Turbo Diesel, Keyless start deluxe panel, Machine width: 78” Machine weighs: 10,500lbs $325
  • 325 /Daily
  • 975 /Weekly
  • 2925 /monthly

Stock #23050, Sale Price $58,000 Foot controls 2 speed, Open cab, Bucket positioning, 92HP Turbo Diesel, Keyless start deluxe panel, Machine width: 78” Machine weighs: 10,500lbs

View Listing
18 Bobcat Toolcat 5600 #22018 Stock #22018, Sale Price $58,000 Cab with AC and heat, 27GPM High flow auxiliary hydraulics, Power bobtach, 4 wheel drive  and 4 wheel steer, Hydraulic dump bed, Rear receiver hitch, 17MPH max speed, 61HP Turbo Diesel, 60” wide, 81” tall, $375
  • 375 /Daily
  • 1125 /Weekly
  • 3375 /monthly

Stock #22018, Sale Price $58,000 Cab with AC and heat, 27GPM High flow auxiliary hydraulics, Power bobtach, 4 wheel drive  and 4 wheel steer, Hydraulic dump bed, Rear receiver hitch, 17MPH max speed, 61HP Turbo Diesel, 60” wide, 81” tall,

View Listing
20 Bobcat S76 #23037 Stock #23037, Sale Price $57,000 AC and heated cab, Power bobtach, Deluxe keyless start panel Standard foot controls Suspension seat, 74HP Turbo Diesel, Machine weights: 8,800lbs Rated lift cap: 3100lbs $325
  • 325 /Daily
  • 975 /Weekly
  • 2925 /monthly

Stock #23037, Sale Price $57,000 AC and heated cab, Power bobtach, Deluxe keyless start panel Standard foot controls Suspension seat, 74HP Turbo Diesel, Machine weights: 8,800lbs Rated lift cap: 3100lbs

View Listing
22 Bobcat S76 #23021 Stock #23021, Sale Price $56,000 Open cab, Foot controls, Deluxe keyless panel, 74HP Turbo Diesel, Rated Operating Capacity: 2,900lb Auxiliary Std Flow: 23.3gal/min Suspension seat, With 72” wide bucket, Machine weights: 8,600lbs $300
  • 300 /Daily
  • 900 /Weekly
  • 2700 /monthly

Stock #23021, Sale Price $56,000 Open cab, Foot controls, Deluxe keyless panel, 74HP Turbo Diesel, Rated Operating Capacity: 2,900lb Auxiliary Std Flow: 23.3gal/min Suspension seat, With 72” wide bucket, Machine weights: 8,600lbs

View Listing
20 Bobcat E42 #23027 Stock #23027, Sale Price $56,000 Quick coupler, Keyless deluxe touchscreen panel, 42HP turbo Diesel, Factory radio, 2 speed, Machine weighs 9400lbs, $300
  • 300 /Daily
  • 900 /Weekly
  • 2700 /monthly

Stock #23027, Sale Price $56,000 Quick coupler, Keyless deluxe touchscreen panel, 42HP turbo Diesel, Factory radio, 2 speed, Machine weighs 9400lbs,

View Listing
19 Bobcat T650 #23059 Stock# 23059, Sale price $55,000 Cab A/C and heat, Wide tracks, Power bobtach, Foot controls, 74HP Turbo Diesel, Suspension seat, Machine weighs 9500lbs, 78” wide bucket, $325
  • 325 /Daily
  • 975 /Weekly
  • 2925 /monthly

Stock# 23059, Sale price $55,000 Cab A/C and heat, Wide tracks, Power bobtach, Foot controls, 74HP Turbo Diesel, Suspension seat, Machine weighs 9500lbs, 78” wide bucket,

View Listing
16 FAE STC/DT150 Stone Crusher #UA22007 Stock #UA22007, Sale Price $54,000 1000RPM PTO driven, Requires 100HP to 220HP tractor, IVT – CVT or creeper transmission on tractor required, 62” wide working width, 79” overall width, 36 Carbide teeth, 8” Max working depth Hydraulic rear hood, Weighs 6000lbs Call for Rental Rates $
  • Call for Rental Rates /Weekly

Stock #UA22007, Sale Price $54,000 1000RPM PTO driven, Requires 100HP to 220HP tractor, IVT – CVT or creeper transmission on tractor required, 62” wide working width, 79” overall width, 36 Carbide teeth, 8” Max working depth Hydraulic rear hood, Weighs 6000lbs Call for Rental Rates

View Listing
16 Bobcat S770 #23011 Stock #23011, Sale Price $53,000 Cab A/C and heat, High flow auxiliary hydraulics, 2 speed, Power bobtach, SJC joystick controls, Bucket positioning, 92HP Turbo Diesel, Suspension seat, $325
  • 325 /Daily
  • 975 /Weekly
  • 2925 /monthly

Stock #23011, Sale Price $53,000 Cab A/C and heat, High flow auxiliary hydraulics, 2 speed, Power bobtach, SJC joystick controls, Bucket positioning, 92HP Turbo Diesel, Suspension seat,

View Listing
19 Bobcat S850 #23036 Stock #23036, Sale Price $53,000 AC and heated cab, High flow, 2 speed, SJC Joystick controls, Reversing fan, Power bobtach, Deluxe keyless start panel, 100HP Turbo Diesel, Machine weights: 10,500lbs $375
  • 375 /Daily
  • 1125 /Weekly
  • 3375 /monthly

Stock #23036, Sale Price $53,000 AC and heated cab, High flow, 2 speed, SJC Joystick controls, Reversing fan, Power bobtach, Deluxe keyless start panel, 100HP Turbo Diesel, Machine weights: 10,500lbs

View Listing
19 Bobcat S740 #23047 Stock #23047, Sale Price $53,000 AC and heated cab, 2 speed, Power bobtach, Deluxe keyless start panel SJC joystick controls Suspension seat, 74HP Turbo Diesel, Machine weights: 8,800lbs $325
  • 325 /Daily
  • 975 /Weekly
  • 2925 /monthly

Stock #23047, Sale Price $53,000 AC and heated cab, 2 speed, Power bobtach, Deluxe keyless start panel SJC joystick controls Suspension seat, 74HP Turbo Diesel, Machine weights: 8,800lbs

View Listing
05 Ford F750 Water Truck #22101 Stock #22101, Sale Price $53,000 2000 gallon water tank, Front, rear and left side sprayers, Cat Turbo Diesel, 6 speed manual trans, 25,999GVW 25,000miles $500
  • 500 /Daily
  • 1500 /Weekly
  • 4500 /monthly

Stock #22101, Sale Price $53,000 2000 gallon water tank, Front, rear and left side sprayers, Cat Turbo Diesel, 6 speed manual trans, 25,999GVW 25,000miles

View Listing
21 Bobcat S64 #23061 Stock #23061, Sale Price $51,000 Cab with AC and heat, 2 speed, Power bobtach, Air ride and heated seat, Foot controls Keyless start panel, 64HP Turbo Diesel, 68” wide bucket, Machine weighs: 7000lbs Rated lift cap: 2300lbs, 28 gallon fuel tank, $275
  • 275 /Daily
  • 825 /Weekly
  • 2475 /monthly

Stock #23061, Sale Price $51,000 Cab with AC and heat, 2 speed, Power bobtach, Air ride and heated seat, Foot controls Keyless start panel, 64HP Turbo Diesel, 68” wide bucket, Machine weighs: 7000lbs Rated lift cap: 2300lbs, 28 gallon fuel tank,

View Listing
22 CAT CB2.5GC #23064 Stock #23064, Sale Price $50,000 39” Double Drums 50 hours, 24HP C1.7 Turbo Diesel, Side shifting seat, Front and rear work lights, Strobe light, Front and rear sprays 52 Gallon water tank, 14 Gallon fuel tank, Weighs 5,600lbs $275
  • 275 /Daily
  • 825 /Weekly
  • 2475 /monthly

Stock #23064, Sale Price $50,000 39” Double Drums 50 hours, 24HP C1.7 Turbo Diesel, Side shifting seat, Front and rear work lights, Strobe light, Front and rear sprays 52 Gallon water tank, 14 Gallon fuel tank, Weighs 5,600lbs

View Listing
18 Bobcat T770 #22013 Stock # 22013, Sale price $50,000 Foot controls Open cab, 92HP Turbo Diesel, Keyless start deluxe panel, Power bobtach, Machine width: 78” Machine weighs: 10,500lbs   $325
  • 325 /Daily
  • 975 /Weekly
  • 2925 /monthly

Stock # 22013, Sale price $50,000 Foot controls Open cab, 92HP Turbo Diesel, Keyless start deluxe panel, Power bobtach, Machine width: 78” Machine weighs: 10,500lbs  

View Listing
17 Vactron LP573XDT #22180 Stock #22180, Sale Price $50,000 24HP Kohler diesel, 500 gallon spoil tank, 580 CFM vacuum, 200 Gallon fresh water capacity Reverse Flow Manuel hose boom, 3000 PSI Pressure Water Electric brakes, 12,000lb GWR Trailer Hyd Door latch, $400
  • 400 /Daily
  • 1200 /Weekly
  • 3600 /monthly

Stock #22180, Sale Price $50,000 24HP Kohler diesel, 500 gallon spoil tank, 580 CFM vacuum, 200 Gallon fresh water capacity Reverse Flow Manuel hose boom, 3000 PSI Pressure Water Electric brakes, 12,000lb GWR Trailer Hyd Door latch,

View Listing
2017 Bobcat S590 #23060 Stock #23060, Sale Price $49,000 Cab A/C and heat, Power bobtach, Standard foot controls, 66HP Turbo Diesel, Suspension seat, Rear weight kit, Radio, Machine weighs, 6,800lbs   $275
  • 275 /Daily
  • 825 /Weekly
  • 2475 /monthly

Stock #23060, Sale Price $49,000 Cab A/C and heat, Power bobtach, Standard foot controls, 66HP Turbo Diesel, Suspension seat, Rear weight kit, Radio, Machine weighs, 6,800lbs  

View Listing
15 Vactron LP533SDT Heavy #22171 Stock #22171, Sale Price $49,000 49HP Yanmar diesel, 1000 CFM vacuum, 500 Gallon Debris tank, 2 – 150 gallon fresh water tanks (total 300gallons), 4 gallon / 3000psi pressure washer, Hot water burner, Hydraulic jack stand, Electric brakes, 14,000 GVW $450
  • 450 /Daily
  • 1350 /Weekly
  • 4050 /monthly

Stock #22171, Sale Price $49,000 49HP Yanmar diesel, 1000 CFM vacuum, 500 Gallon Debris tank, 2 – 150 gallon fresh water tanks (total 300gallons), 4 gallon / 3000psi pressure washer, Hot water burner, Hydraulic jack stand, Electric brakes, 14,000 GVW

View Listing
2020 Bobcat T64 #22010 Stock # 22010, Sale price $49,000 Foot controls Open cab, 68HP Turbo Diesel, Machine width: 66” Machine weighs: 8700lbs Keyless start panel   $275
  • 275 /Daily
  • 825 /Weekly
  • 2475 /monthly

Stock # 22010, Sale price $49,000 Foot controls Open cab, 68HP Turbo Diesel, Machine width: 66” Machine weighs: 8700lbs Keyless start panel  

View Listing
17 Bobcat Toolcat 5600 #23063 Stock #23063, Sale Price $49,000 Cab with AC and heat, 27GPM High flow auxiliary hydraulics, Power bobtach, 4 wheel drive  and 4 wheel steer, Extra work lights, strobe, and blinkers, Hydraulic dump bed, Rear receiver hitch, 17MPH max speed, 61HP Turbo Diesel, 60” wide, 81” tall, V plow snow blade available for $2,500 Sand spreader box available for $2,500 $375
  • 375 /Daily
  • 1125 /Weekly
  • 3375 /monthly

Stock #23063, Sale Price $49,000 Cab with AC and heat, 27GPM High flow auxiliary hydraulics, Power bobtach, 4 wheel drive  and 4 wheel steer, Extra work lights, strobe, and blinkers, Hydraulic dump bed, Rear receiver hitch, 17MPH max speed, 61HP Turbo Diesel, 60” wide, 81” tall, V plow snow blade available for $2,500 Sand spreader box available for $2,500

View Listing
14 Ditch Which RT45 #22076 Stock #22076, Sale Price $47,000 H342 rock saw attachment Cuts 18” deep Cuts 5″ wide 49HP Deutz diesel engine Front 4-way backfill blade Machine weights 5,900lbs $325
  • 325 /Daily
  • 1300 /Weekly
  • 3900 /monthly

Stock #22076, Sale Price $47,000 H342 rock saw attachment Cuts 18” deep Cuts 5″ wide 49HP Deutz diesel engine Front 4-way backfill blade Machine weights 5,900lbs

View Listing
14 Vac Tron LP533DT #22153 Stock #22153, Sale Price $46,000 36 Hp Yanmar diesel, 550CFM 500 Gallon Spoil Tank 200 Gallon Water Tank Reverse Flow 3000 PSI High Pressure Water 12,000 GWR Trailer Hyd Door latch $400
  • 400 /Daily
  • 1200 /Weekly
  • 3600 /monthly

Stock #22153, Sale Price $46,000 36 Hp Yanmar diesel, 550CFM 500 Gallon Spoil Tank 200 Gallon Water Tank Reverse Flow 3000 PSI High Pressure Water 12,000 GWR Trailer Hyd Door latch

View Listing
19 Bobcat S740 #23001 Stock #23001, Sale Price $45,000 AC and heated cab, Power bobtach, Deluxe keyless start panel Standard foot controls Suspension seat, 74HP Turbo Diesel, Machine weights: 8,800lbs $325
  • 325 /Daily
  • 975 /Weekly
  • 2925 /monthly

Stock #23001, Sale Price $45,000 AC and heated cab, Power bobtach, Deluxe keyless start panel Standard foot controls Suspension seat, 74HP Turbo Diesel, Machine weights: 8,800lbs

View Listing
15 Bobcat S740 #23041 Stock #23041, Sale Price $43,000 Open cab, Standard Foot controls, 74HP Turbo Diesel, Bucket positioning, 74” wide bucket, Machine weights: 8800lbs $300
  • 300 /Daily
  • 900 /Weekly
  • 2700 /monthly

Stock #23041, Sale Price $43,000 Open cab, Standard Foot controls, 74HP Turbo Diesel, Bucket positioning, 74” wide bucket, Machine weights: 8800lbs

View Listing
19 Bobcat T650 #23043 Stock #23043, Sale Price $43,000 Foot controls Open cab, High flow, Bucket positioning, 74HP Turbo Diesel, Keyless start deluxe panel, Machine width: 78” Machine weighs: 9,000lbs $300
  • 300 /Daily
  • 900 /Weekly
  • 2700 /monthly

Stock #23043, Sale Price $43,000 Foot controls Open cab, High flow, Bucket positioning, 74HP Turbo Diesel, Keyless start deluxe panel, Machine width: 78” Machine weighs: 9,000lbs

View Listing
17 John Deere 323E #23073 Stock# 23073, Sale Price $43,000 $

Stock# 23073, Sale Price $43,000

View Listing
18 Bobcat E35 #23009 Stock #23009, Sale Price $42,000 Quick coupler, Deluxe keyless start panel, 33.5HP Diesel, Machine weighs 7800lbs, Control pattern changer, $275
  • 275 /Daily
  • 825 /Weekly
  • 2475 /monthly

Stock #23009, Sale Price $42,000 Quick coupler, Deluxe keyless start panel, 33.5HP Diesel, Machine weighs 7800lbs, Control pattern changer,

View Listing
New Blue Diamond Drum Mulcher 60” wide cutting width Requires: 35-52 GPM high flow with case drain line, Danfoss H1B 110cc 2 speed motor 34-tooth cutting drum Attachment weighs: 2600lbs Low profile tooth available with knives or carbide, Secondary edge guard on the tooth anvil Hydraulic motor case overpressure protection (COP) Heavy-duty synchronous drive belt Single 1-inch high grade bolt tooth fastening system Sale price with carbide: $44,000 Sale price with knives: $42,000 $450
  • 450 /Daily
  • 1350 /Weekly
  • 4050 /monthly

60” wide cutting width Requires: 35-52 GPM high flow with case drain line, Danfoss H1B 110cc 2 speed motor 34-tooth cutting drum Attachment weighs: 2600lbs Low profile tooth available with knives or carbide, Secondary edge guard on the tooth anvil Hydraulic motor case overpressure protection (COP) Heavy-duty synchronous drive belt Single 1-inch high grade bolt tooth fastening system Sale price with carbide: $44,000 Sale price with knives: $42,000

View Listing
2022 Bobcat MT100 #22185 Stock #22185, Sale Price $40,000 24HP Diesel engine, 1,300lb rated lift capacity, Aux hydraulics, With 44” GP bucket, Machine weighs: 3,400lbs 36” wide Bobcat bucket grapple available for $3,000 $200
  • 200 /Daily
  • 600 /Weekly
  • 1800 /monthly

Stock #22185, Sale Price $40,000 24HP Diesel engine, 1,300lb rated lift capacity, Aux hydraulics, With 44” GP bucket, Machine weighs: 3,400lbs 36” wide Bobcat bucket grapple available for $3,000

View Listing
19 Bobcat E42 #22157 Stock #22157, Sale Price $40,000 Quick coupler, Keyless deluxe panel, 42HP turbo Diesel, Machine weighs 9400lbs, $300
  • 300 /Daily
  • 900 /Weekly
  • 2700 /monthly

Stock #22157, Sale Price $40,000 Quick coupler, Keyless deluxe panel, 42HP turbo Diesel, Machine weighs 9400lbs,

View Listing
15 Vermeer RTX450 #22040 Stock# 22040,  sale price $39,000 Sliding side shift trencher, 50/50 chain with rock and dirt teeth, Cuts 4’ deep X 6” wide, 49HP diesel, Front blade, Machine weighs 6,000lbs     $300
  • 300 /Daily
  • 1200 /Weekly
  • 3600 /monthly

Stock# 22040,  sale price $39,000 Sliding side shift trencher, 50/50 chain with rock and dirt teeth, Cuts 4’ deep X 6” wide, 49HP diesel, Front blade, Machine weighs 6,000lbs    

View Listing
2020 40″ Blue Diamond Planer #UA21079 Sale price $39,000,  UA21079 8” cutting depth 1 ½” thick cutting drum, 76 teeth, 5” tooth clearance from drum,, Hydraulic side shift, Hydraulic depth and tilt adjustment, Attachment weighs 2,900lbs Requires high flow,   $400
  • 400 /Daily
  • 1200 /Weekly
  • 3600 /monthly

Sale price $39,000,  UA21079 8” cutting depth 1 ½” thick cutting drum, 76 teeth, 5” tooth clearance from drum,, Hydraulic side shift, Hydraulic depth and tilt adjustment, Attachment weighs 2,900lbs Requires high flow,  

View Listing
17 Cat CB24B #22017 Stock #22017 2017 Cat CB24B 48” Wide Double Drum 36HP Diesel, 62 Gallon water tank, 17 Gallon fuel tank, Weighs 6,000lbs   $275
  • 275 /Daily
  • 825 /Weekly
  • 2475 /monthly

Stock #22017 2017 Cat CB24B 48” Wide Double Drum 36HP Diesel, 62 Gallon water tank, 17 Gallon fuel tank, Weighs 6,000lbs  

View Listing
91 CAT 963 Track Loader #22182 Stock #22182, Sale Price $37,000 Cab with AC and heat, Quick coupler With Bucket and rake attachment Bucket is 8’ 2” wide with teeth, Rake is 9’ 7” wide, 20” wide track pads, Machine weighs 45,000lbs 150HP Cat 3304 Turbo diesel $

Stock #22182, Sale Price $37,000 Cab with AC and heat, Quick coupler With Bucket and rake attachment Bucket is 8’ 2” wide with teeth, Rake is 9’ 7” wide, 20” wide track pads, Machine weighs 45,000lbs 150HP Cat 3304 Turbo diesel

View Listing
Like new 2012 Indeco HP5500 Stock# UA19016, Sale price $35,000 Energy Class : 5,000lb Actual weight 5000lbs, 5.75” Tool Impact Frequency: 370-760 bpm 90MM pins, With mount for John Deere/Hitachi 240/245/250/270/290/300 excavators, Also comes with Cat quick coupler mount,   $700
  • 700 /Daily
  • 2100 /Weekly
  • 6300 /monthly

Stock# UA19016, Sale price $35,000 Energy Class : 5,000lb Actual weight 5000lbs, 5.75” Tool Impact Frequency: 370-760 bpm 90MM pins, With mount for John Deere/Hitachi 240/245/250/270/290/300 excavators, Also comes with Cat quick coupler mount,  

View Listing
21 Bobcat E20 #22146 Stock #22146, Sale Price $32,000 13.3 HP Diesel Max dig depth 8’6”, Expandable tracks, Machine width with tracks in 39”. Machine width with tracks out: 54” Machine weighs 4,300lbs With 8” wide bucket, $225
  • 225 /Daily
  • 675 /Weekly
  • 2025 /monthly

Stock #22146, Sale Price $32,000 13.3 HP Diesel Max dig depth 8’6”, Expandable tracks, Machine width with tracks in 39”. Machine width with tracks out: 54” Machine weighs 4,300lbs With 8” wide bucket,

View Listing
2020 Indeco IMH-15 Mulcher #UA22005 Stock #UA22005,  Sale price $32,000 Excavator mount, Requires case drain line on excavator, 80MM pins, 18” center to center of pins, 13” clear between pin bosses. 42 cutting knives 40” cutting width, Attachment weight 4000lbs   $500
  • 500 /Daily
  • 1500 /Weekly
  • 4500 /monthly

Stock #UA22005,  Sale price $32,000 Excavator mount, Requires case drain line on excavator, 80MM pins, 18” center to center of pins, 13” clear between pin bosses. 42 cutting knives 40” cutting width, Attachment weight 4000lbs  

View Listing
21 Bobcat E20 #22145 Stock #22145, Sale Price $32,000 13.3 HP Diesel Max dig depth 8’6”, Expandable tracks, Machine width with tracks in 39”. Machine width with tracks out: 54” Machine weighs 4,300lbs With 8” wide bucket, $225
  • 225 /Daily
  • 675 /Weekly
  • 2025 /monthly

Stock #22145, Sale Price $32,000 13.3 HP Diesel Max dig depth 8’6”, Expandable tracks, Machine width with tracks in 39”. Machine width with tracks out: 54” Machine weighs 4,300lbs With 8” wide bucket,

View Listing
19 Bobcat MT85 #22103 Stock #22103, Sale Price $31,000 25HP Kubota Diesel engine, 850lb rated lift capacity, 10” wide tracks, 42” overall width, Aux hydraulics, With GP bucket, Machine weighs: 3,100lbs 36” wide Bobcat bucket grapple available for $3,000 $200
  • 200 /Daily
  • 600 /Weekly
  • 1800 /monthly

Stock #22103, Sale Price $31,000 25HP Kubota Diesel engine, 850lb rated lift capacity, 10” wide tracks, 42” overall width, Aux hydraulics, With GP bucket, Machine weighs: 3,100lbs 36” wide Bobcat bucket grapple available for $3,000

View Listing
18 Indeco HP4000 Hydraulic Breaker #UA22094 Stock #UA22094, Sale Price Energy Class : 4,000lb Actual weight: 3,800lbs, 5.10” Tool / chisel, Stick pin: 80mm Link pin: 80mm Space between pin bosses: 12.25” Center to center of pins: 18.5” $625
  • 625 /Daily
  • 1875 /Weekly
  • 5625 /monthly

Stock #UA22094, Sale Price Energy Class : 4,000lb Actual weight: 3,800lbs, 5.10” Tool / chisel, Stick pin: 80mm Link pin: 80mm Space between pin bosses: 12.25” Center to center of pins: 18.5”

View Listing
19 Bobcat MT85 #22105 Stock #22105, Sale Price $29,000 25HP Kubota Diesel engine, 850lb rated lift capacity, 7” wide tracks, 36” overall width, Aux hydraulics, With GP bucket, Machine weighs: 3,100lbs 36” wide Bobcat bucket grapple available for $3,000 $200
  • 200 /Daily
  • 600 /Weekly
  • 1800 /monthly

Stock #22105, Sale Price $29,000 25HP Kubota Diesel engine, 850lb rated lift capacity, 7” wide tracks, 36” overall width, Aux hydraulics, With GP bucket, Machine weighs: 3,100lbs 36” wide Bobcat bucket grapple available for $3,000

View Listing
21 Bobcat WS24 #UA23030 Stock #UA23030, Sale Price $28,000 Skid Steer Wheel Saw / rock saw 24” max depth, 8” wide, Hydraulic side shift, Hydraulic depth adjustments, Requires 7 pin electrical control harness, Requires high flow, Attachment weighs: 2800lbs, $275
  • 275 /Daily
  • 825 /Weekly
  • 2475 /monthly

Stock #UA23030, Sale Price $28,000 Skid Steer Wheel Saw / rock saw 24” max depth, 8” wide, Hydraulic side shift, Hydraulic depth adjustments, Requires 7 pin electrical control harness, Requires high flow, Attachment weighs: 2800lbs,

View Listing
20 Bobcat FRC60 Mulcher #UA23033 Stock #UA23033, Sale Price $28,000 60” wide cut, 2 speed, With pressure gauge, 30 Carbide teeth, Requires High flow, Attachment weight: 2,300lbs $450
  • 450 /Daily
  • 1350 /Weekly
  • 4050 /monthly

Stock #UA23033, Sale Price $28,000 60” wide cut, 2 speed, With pressure gauge, 30 Carbide teeth, Requires High flow, Attachment weight: 2,300lbs

View Listing
21 Indeco 3.5SS Mulcher #UA21058 Stock # UA21058, Sale price $28,000 60” Cutting width, Skid steer mount, 46 cutters, Requires minimum of 35GPM, Piston Motor with case drain, Pressure gauge, Heavy Duty HARDOX Construction, Chevron style tooth patter draws material in, Attachment weight:  3100lbs $450
  • 450 /Daily
  • 1350 /Weekly
  • 4050 /monthly

Stock # UA21058, Sale price $28,000 60” Cutting width, Skid steer mount, 46 cutters, Requires minimum of 35GPM, Piston Motor with case drain, Pressure gauge, Heavy Duty HARDOX Construction, Chevron style tooth patter draws material in, Attachment weight:  3100lbs

View Listing
19 FAE UML/SSL-150 VT Mulcher #UA22065 Stock #UA22065, Sale Price $27,000 60” wide cutting width, Carbide teeth, Requires high flow, max 53GPM. With hyd cooler option, Hyd front door, Weighs 2800lbs $450
  • 450 /Daily
  • 1350 /Weekly
  • 4050 /monthly

Stock #UA22065, Sale Price $27,000 60” wide cutting width, Carbide teeth, Requires high flow, max 53GPM. With hyd cooler option, Hyd front door, Weighs 2800lbs

View Listing
20 Used Blue Diamond Disc Mulcher #UA22101 Stock #UA22101, Sale Price $25,000 60” wide cutting disc, Four point Hardened Steel teeth High flow (32 to 45GPM), 150CC motor, Weighs 2,425lbs New units available for $33,000 Model # 103310 $350
  • 350 /Daily
  • 1050 /Weekly
  • 3150 /monthly

Stock #UA22101, Sale Price $25,000 60” wide cutting disc, Four point Hardened Steel teeth High flow (32 to 45GPM), 150CC motor, Weighs 2,425lbs New units available for $33,000 Model # 103310

View Listing
17 Bobcat FC60 Mulcher #UA21087 Stock # UA21087   Sale price $24,000 60” wide cut, 2 speed, With pressure gauge, 30 Carbide teeth, Requires High flow, Attachment weight: 2,300lbs   $450
  • 450 /Daily
  • 1350 /Weekly
  • 4050 /monthly

Stock # UA21087   Sale price $24,000 60” wide cut, 2 speed, With pressure gauge, 30 Carbide teeth, Requires High flow, Attachment weight: 2,300lbs  

View Listing
New 2022 CAT 10′ root rake/grapple #UA23036 Stock #UA23036, Sale Price $24,000 Cat model # 592-7177 Fusion quick coupler mount, 10’ over all width Space between lower tines 12” Weighs: 5100lbs, Fits to Cat wheel loaders with fusion coupler, 926M, 930M, 938M, 950M and maybe others. $
  • 3150 /monthly

Stock #UA23036, Sale Price $24,000 Cat model # 592-7177 Fusion quick coupler mount, 10’ over all width Space between lower tines 12” Weighs: 5100lbs, Fits to Cat wheel loaders with fusion coupler, 926M, 930M, 938M, 950M and maybe others.

View Listing
2013 Chicago Pneumatic RX22 Stock # UA21014 Hammer/Breaker – Hydraulic 3,000 ft/lb, 80mm pins, Auto lube Hammer weight: 3,310lbs $550
  • 550 /Daily
  • 1650 /Weekly
  • 4950 /monthly

Stock # UA21014 Hammer/Breaker – Hydraulic 3,000 ft/lb, 80mm pins, Auto lube Hammer weight: 3,310lbs

View Listing
16 FAE DML/SSL150 Mulcher Stock# UA21032 58” wide cutting width, Carbide cutters, Font door, Standard flow, (16 to 30GPM) Unit weighs 1770lbs   $400
  • 400 /Daily
  • 1200 /Weekly
  • 3600 /monthly

Stock# UA21032 58” wide cutting width, Carbide cutters, Font door, Standard flow, (16 to 30GPM) Unit weighs 1770lbs  

View Listing
2017 Diamond FBS060 Disc Mulcher   Stock # UA21073.   Sale price $19,000 60” wide cutting disc, Four point Hardened Steel teeth High flow, 32 to 45GPM HD Gear motor Weighs 2,300lbs   $350
  • 350 /Daily
  • 1050 /Weekly
  • 3150 /monthly

  Stock # UA21073.   Sale price $19,000 60” wide cutting disc, Four point Hardened Steel teeth High flow, 32 to 45GPM HD Gear motor Weighs 2,300lbs  

View Listing
Severe Duty Open Front Cutter Blue Diamond Severe Duty Open Front Cutter 10″ Tree Capacity, Four Double-Edge Blades High torque piston motor Massive 1″ thick serrated blade carrier weighs over 500 lbs. Easy machine entry Adjustable skid shoes Cutter weighs 2000 lbs. Large pressure gauge 1 Year Mfg Warranty 72″ Standard flow..16-26GPM…$19,000 72″ High flow…27-35GPM…$19,000 72″ High Flow..36-45GPM..$19,000 $225
  • 225 /Daily
  • 675 /Weekly
  • 2025 /monthly

Blue Diamond Severe Duty Open Front Cutter 10″ Tree Capacity, Four Double-Edge Blades High torque piston motor Massive 1″ thick serrated blade carrier weighs over 500 lbs. Easy machine entry Adjustable skid shoes Cutter weighs 2000 lbs. Large pressure gauge 1 Year Mfg Warranty 72″ Standard flow..16-26GPM…$19,000 72″ High flow…27-35GPM…$19,000 72″ High Flow..36-45GPM..$19,000

View Listing
12 Bobcat WS24 #UA22097 Stock #UA22097, Sale Price $19,000 Skid Steer Wheel Saw / rock saw 24” max depth, 6” wide, Hydraulic side shift, Hydraulic depth adjustments, Can be ran on 7 pin or 14pin connector, Requires high flow, Attachment weighs: 2800lbs, $275
  • 275 /Daily
  • 825 /Weekly
  • 2475 /monthly

Stock #UA22097, Sale Price $19,000 Skid Steer Wheel Saw / rock saw 24” max depth, 6” wide, Hydraulic side shift, Hydraulic depth adjustments, Can be ran on 7 pin or 14pin connector, Requires high flow, Attachment weighs: 2800lbs,

View Listing
21 CAT CV119 Compactor #UA23009 Stock #UA23009, Sale Price $19,000 73” wide vibratory smooth drum, Max 22 GPM , Plastic drum scrapers/cleaners, Weighs : 2200lbs $225
  • 225 /Daily
  • 675 /Weekly
  • 2025 /monthly

Stock #UA23009, Sale Price $19,000 73” wide vibratory smooth drum, Max 22 GPM , Plastic drum scrapers/cleaners, Weighs : 2200lbs

View Listing
Blue Diamond 84″ Brush cutter 84” cutting width Dual Motors with direct drive, 4 double-sided blades Cuts clockwise and counter clockwise Cut up to a 4″ tree, Wire protection kit on both blade carriers, Rated for 15-22 GPM Weighs : 1850lbs Adjustable height wheels Floating deck design for uneven ground Grease fittings on all pivots 1-year warranty $225
  • 225 /Daily
  • 675 /Weekly
  • 2025 /monthly

84” cutting width Dual Motors with direct drive, 4 double-sided blades Cuts clockwise and counter clockwise Cut up to a 4″ tree, Wire protection kit on both blade carriers, Rated for 15-22 GPM Weighs : 1850lbs Adjustable height wheels Floating deck design for uneven ground Grease fittings on all pivots 1-year warranty

View Listing
Used 22 Blue Diamond Brush Cutter #UA22107 Stock #UA22107, Sale Price $15,500 Severe Duty Series 2 Open Front, Model # 303132 High flow (max 45GPM), Requires case drain line, 10″ Tree Capacity, Four Double-Edge Blades, High torque piston motor, Massive 1″ thick serrated blade carrier weighs over 500 lbs, Adjustable skid shoes, Cutter weighs 2000 lbs, Large pressure gauge, New models available for $20,000 Used model price…………$15,500 $225
  • 225 /Daily
  • 675 /Weekly
  • 2025 /monthly

Stock #UA22107, Sale Price $15,500 Severe Duty Series 2 Open Front, Model # 303132 High flow (max 45GPM), Requires case drain line, 10″ Tree Capacity, Four Double-Edge Blades, High torque piston motor, Massive 1″ thick serrated blade carrier weighs over 500 lbs, Adjustable skid shoes, Cutter weighs 2000 lbs, Large pressure gauge, New models available for $20,000 Used model price…………$15,500

View Listing
Used 2022 Blue Diamond Brush Cutter #UA22103 Stock #UA22103, Sale Price $15,500 Severe Duty Series 2 Open Front, Model # 103127 Flow required (27GPM to 35GPM), Requires case drain line, 10″ Tree Capacity, Four Double-Edge Blades, High torque piston motor, Massive 1″ thick serrated blade carrier weighs over 500 lbs, Adjustable skid shoes, Cutter weighs 2000 lbs, Large pressure gauge, New models available for $20,000 Used model price…………$15,500 $225
  • 225 /Daily
  • 675 /Weekly
  • 2025 /monthly

Stock #UA22103, Sale Price $15,500 Severe Duty Series 2 Open Front, Model # 103127 Flow required (27GPM to 35GPM), Requires case drain line, 10″ Tree Capacity, Four Double-Edge Blades, High torque piston motor, Massive 1″ thick serrated blade carrier weighs over 500 lbs, Adjustable skid shoes, Cutter weighs 2000 lbs, Large pressure gauge, New models available for $20,000 Used model price…………$15,500

View Listing
22 Used Blue Diamond Brush Cutter #UA22110 Stock #UA22110, Sale Price $14,500 Severe Duty Open Front series, High flow (max 45GPM), Requires case drain line, 10″ Tree Capacity, Four Double-Edge Blades, High torque piston motor, Massive 1″ thick serrated blade carrier weighs over 500 lbs, Adjustable skid shoes, Cutter weighs 2000 lbs, Large pressure gauge, New models available for $19,000 Used model price…………$14,500 $225
  • 225 /Daily
  • 675 /Weekly
  • 2025 /monthly

Stock #UA22110, Sale Price $14,500 Severe Duty Open Front series, High flow (max 45GPM), Requires case drain line, 10″ Tree Capacity, Four Double-Edge Blades, High torque piston motor, Massive 1″ thick serrated blade carrier weighs over 500 lbs, Adjustable skid shoes, Cutter weighs 2000 lbs, Large pressure gauge, New models available for $19,000 Used model price…………$14,500

View Listing
16″ Dual Cylinder Shear NEW M&M 16″ Tree shear – Dual cylinder shear w/ 48″ tree guard. Specifications: Cuts flush to the ground, Built-in 10 gallon chemical spray tank, Optional Spray System and Tree Grapple, Hidden grease fittings and hydraulic hoses which greatly reduces down time, 4″ chrome plated pins spiral cut hinge pins, Priced with hoses and couplers. 12″ Dual Cylinder Shear also available – $10,750.00 Call for Availability $150
  • 150 /Daily
  • 450 /Weekly
  • 1350 /monthly

NEW M&M 16″ Tree shear – Dual cylinder shear w/ 48″ tree guard. Specifications: Cuts flush to the ground, Built-in 10 gallon chemical spray tank, Optional Spray System and Tree Grapple, Hidden grease fittings and hydraulic hoses which greatly reduces down time, 4″ chrome plated pins spiral cut hinge pins, Priced with hoses and couplers. 12″ Dual Cylinder Shear also available – $10,750.00 Call for Availability

View Listing
18 Blue Diamond Stump Grinder UA21061 Stock #UA21061,  Sale price $13,000 2018 year model 26” cutter wheel with Greenteeth, Cuts forwards and Reverse, High torque piston motor, High flow required (36 to 45GPM), Case drain line required, Weights 720 lbs $175
  • 175 /Daily
  • 525 /Weekly
  • 1575 /monthly

Stock #UA21061,  Sale price $13,000 2018 year model 26” cutter wheel with Greenteeth, Cuts forwards and Reverse, High torque piston motor, High flow required (36 to 45GPM), Case drain line required, Weights 720 lbs

View Listing
Extreme duty open front Brush Cutter Blue Diamond Extreme Duty Open Front Shredder 6″ Tree Capacity, Four Double-Edge Blades, Open Front w/ Push Bar, Comes w/ All Hoses & Couplers, Cutter turns clockwise and counterclockwise, 3/4″ Thick Blade Carrier, Wire Protection Kit under Deck, 3.5″ thick blade carrier shaft passes thru large grease packed bearing housing, Direct Drive, Cut-away Back 1 Year Mfg Warranty Weighs : 1547 lbs. 72″ cut, 16-26GPM …..$12,500 60″ cut, 16-26GPM……$11,000 72″ cut, 27-35GPM……call 60″ cut, 27-35GPM……call $175
  • 175 /Daily
  • 525 /Weekly
  • 1575 /monthly

Blue Diamond Extreme Duty Open Front Shredder 6″ Tree Capacity, Four Double-Edge Blades, Open Front w/ Push Bar, Comes w/ All Hoses & Couplers, Cutter turns clockwise and counterclockwise, 3/4″ Thick Blade Carrier, Wire Protection Kit under Deck, 3.5″ thick blade carrier shaft passes thru large grease packed bearing housing, Direct Drive, Cut-away Back 1 Year Mfg Warranty Weighs : 1547 lbs. 72″ cut, 16-26GPM …..$12,500 60″ cut, 16-26GPM……$11,000 72″ cut, 27-35GPM……call 60″ cut, 27-35GPM……call

View Listing
New Blue Diamond Power Rakes  POWER RAKE -SEVERE DUTY -SERIES 3 6,000 Series hydraulic motor Airless tires Replaceable teeth and carbide options 3/8” thick wall tube frame 1.5” motor shaft and high pressure seals 8” drum diameter, 13” including teeth With skid steer mount and manual angle. Hydraulic angle available for additional cost 84″ weighs 1,225 lbs,……..$18,750 96″ weighs 1,275 lbs,……..$19,250 120″ ………………………..$20,750 Call for price of your machine specific control harness for hydraulic angle option Rental rates: $200/day, $600/week, $1,800/month POWER RAKE -EXTREME DUTY With skid steer mount and manual angle. Hydraulic angle available for additional cost 72” Extreme duty, Fixed teeth, weighs 1,100lbs…..$13,500 84” Extreme duty, Fixed teeth, weighs 1,130lbs……$13,750 96” Extreme duty, Fixed teeth, weights 1,155lbs…..$14,100 POWER RAKE -HEAVY DUTY SERIES 2 With skid steer mount and manual angle. Hydraulic angle available for additional cost 48” HD2, Fixed teeth, weighs 696lbs……….…$11,400 60” HD2, Fixed teeth,  weighs 754lbs………… $11,750 72” HD2, Fixed teeth, weighs 884lbs …………$12,100 $200
  • 200 /Daily
  • 600 /Weekly
  • 1800 /monthly

 POWER RAKE -SEVERE DUTY -SERIES 3 6,000 Series hydraulic motor Airless tires Replaceable teeth and carbide options 3/8” thick wall tube frame 1.5” motor shaft and high pressure seals 8” drum diameter, 13” including teeth With skid steer mount and manual angle. Hydraulic angle available for additional cost 84″ weighs 1,225 lbs,……..$18,750 96″ weighs 1,275 lbs,……..$19,250 120″ ………………………..$20,750 Call for price of your machine specific control harness for hydraulic angle option Rental rates: $200/day, $600/week, $1,800/month POWER RAKE -EXTREME DUTY With skid steer mount and manual angle. Hydraulic angle available for additional cost 72” Extreme duty, Fixed teeth, weighs 1,100lbs…..$13,500 84” Extreme duty, Fixed teeth, weighs 1,130lbs……$13,750 96” Extreme duty, Fixed teeth, weights 1,155lbs…..$14,100 POWER RAKE -HEAVY DUTY SERIES 2 With skid steer mount and manual angle. Hydraulic angle available for additional cost 48” HD2, Fixed teeth, weighs 696lbs……….…$11,400 60” HD2, Fixed teeth,  weighs 754lbs………… $11,750 72” HD2, Fixed teeth, weighs 884lbs …………$12,100

View Listing
20 Blue Diamond 84″ Cutter #UA22100 Stock #UA22100, Sale Price $11,000 84” cutting width Dual Motors with direct drive, 4 double-sided blades Cuts clockwise and counterclockwise, Cut up to a 4″ tree, Wire protection kit on both blade carriers, Rated for 15-22 GPM Requires case drain line, Weighs : 1850lbs Adjustable height wheels Floating deck design for uneven ground Used price……$11,000 New Sale price….$18,000 $225
  • 225 /Daily
  • 675 /Weekly
  • 2025 /monthly

Stock #UA22100, Sale Price $11,000 84” cutting width Dual Motors with direct drive, 4 double-sided blades Cuts clockwise and counterclockwise, Cut up to a 4″ tree, Wire protection kit on both blade carriers, Rated for 15-22 GPM Requires case drain line, Weighs : 1850lbs Adjustable height wheels Floating deck design for uneven ground Used price……$11,000 New Sale price….$18,000

View Listing
18 Blue Diamond HB400 Hydraulic Hammer Stock #UA20059, Sale Price $10,500 1000lb Energy class With skid steer mount Max 29GPM Attachment weight: 980lbs Used 2018 sale price………….$10,500 New price……………….…$16,000   $275
  • 275 /Daily
  • 825 /Weekly
  • 2475 /monthly

Stock #UA20059, Sale Price $10,500 1000lb Energy class With skid steer mount Max 29GPM Attachment weight: 980lbs Used 2018 sale price………….$10,500 New price……………….…$16,000  

View Listing
Blue Diamond Pickup Broom Series 2 Premium pick-up broom Heavy 2″ main shaft, oversized 6″ bearings 7″ tall front “crash” bar Easy adjustments! No tools required. 26″ Diameter Poly / Steel bristle mix Flow Range – 15-25 GPM 60″ Pick-Up Broom…..$10,000 72″ Pick-Up Broom…..$10,500 84″ Pick-Up Broom…..$11,500 96″ Pick-Up Broom…..$12,500 Optional Water Kit & Gutter Brush (call for pricing) $150
  • 150 /Daily
  • 450 /Weekly
  • 1350 /monthly

Series 2 Premium pick-up broom Heavy 2″ main shaft, oversized 6″ bearings 7″ tall front “crash” bar Easy adjustments! No tools required. 26″ Diameter Poly / Steel bristle mix Flow Range – 15-25 GPM 60″ Pick-Up Broom…..$10,000 72″ Pick-Up Broom…..$10,500 84″ Pick-Up Broom…..$11,500 96″ Pick-Up Broom…..$12,500 Optional Water Kit & Gutter Brush (call for pricing)

View Listing
16 Bobcat 14″ Planer #UA22114 Stock #UA22114, Sale Price $9,000 Hydraulic Side shift, Manuel depth adjustment, Max depth cut: 6” Standard flow, 15 to 27GPM Weights: 1375lbs $225
  • 225 /Daily
  • 675 /Weekly
  • 2025 /monthly

Stock #UA22114, Sale Price $9,000 Hydraulic Side shift, Manuel depth adjustment, Max depth cut: 6” Standard flow, 15 to 27GPM Weights: 1375lbs

View Listing
21 Cat T112 Trencher #UA23008 Stock #UA23008, Sale Price $9,000 48” max depth, Set up for 6” wide dirt cups, Hydraulic Side shift, Standard flow, max 22GPM, Weights: 1000lbs $175
  • 175 /Daily
  • 525 /Weekly
  • 1575 /monthly

Stock #UA23008, Sale Price $9,000 48” max depth, Set up for 6” wide dirt cups, Hydraulic Side shift, Standard flow, max 22GPM, Weights: 1000lbs

View Listing
Bobcat HB1180 #UA21037 Stock #UA21037 , Sale price $8,500 750LB class With Bobcat mini excavator mount Fits to all skid steers   $225
  • 225 /Daily
  • 675 /Weekly
  • 2025 /monthly

Stock #UA21037 , Sale price $8,500 750LB class With Bobcat mini excavator mount Fits to all skid steers  

View Listing
16 Bradco ATP96 Angle Blade #UA22069 Stock # UA22069, Sale Price $8,500 96” wide 29” tall, Like new condition, Requires 12 volt electrical harness, Weighs 1500lbs,   $125
  • 125 /Daily
  • 375 /Weekly
  • 1125 /monthly

Stock # UA22069, Sale Price $8,500 96” wide 29” tall, Like new condition, Requires 12 volt electrical harness, Weighs 1500lbs,  

View Listing
18 Blue Diamond 72″ Pickup Broom #UA22088 Stock #UA22088, Sale Price $8,500 Series 2 Premium pick-up broom With water tank, 12volt pump and sprayers, Heavy 2″ main shaft, oversized 6″ bearings 7″ tall front “crash” bar Easy adjustments! No tools required. 26″ Diameter Poly / Steel bristle mix Flow Range – 15-25 GPM Available new for $13,600 $175
  • 175 /Daily
  • 525 /Weekly
  • 1575 /monthly

Stock #UA22088, Sale Price $8,500 Series 2 Premium pick-up broom With water tank, 12volt pump and sprayers, Heavy 2″ main shaft, oversized 6″ bearings 7″ tall front “crash” bar Easy adjustments! No tools required. 26″ Diameter Poly / Steel bristle mix Flow Range – 15-25 GPM Available new for $13,600

View Listing
18 Blue Diamond Post Driver #UA22116 Stock #22116, Sale Price $8,500 Vibratory post driver, Requires 7-26 GPM auxiliary flow, Requires case drain line, Has 6″ post adapter (other sizes available) Weighs 300 lbs. Used price……$8,500 New Sale price….$13,500 $150
  • 150 /Daily
  • 450 /Weekly
  • 1350 /monthly

Stock #22116, Sale Price $8,500 Vibratory post driver, Requires 7-26 GPM auxiliary flow, Requires case drain line, Has 6″ post adapter (other sizes available) Weighs 300 lbs. Used price……$8,500 New Sale price….$13,500

View Listing
20 Blue Diamond Mini Excavator cutter #UA21096 Stock #UA21096, Sale Price: $8,000(USED) 42″ wide cutting width 3 Blade system 6″ cutting capacity 3/4″ Thick blade carrier High torque piston motor 16 to 25 GPM Cutaway side No case drain needed Wire protection kit under deck Grease filled bearing drive housing Fits to Mini Excavators: 10,000lb to 19,000lb Has Kubota mount for KX040, KX057, KX080 Weighs 730lbs New price…$11,400 Used Price…$8,000   $150
  • 150 /Daily
  • 450 /Weekly
  • 1350 /monthly

Stock #UA21096, Sale Price: $8,000(USED) 42″ wide cutting width 3 Blade system 6″ cutting capacity 3/4″ Thick blade carrier High torque piston motor 16 to 25 GPM Cutaway side No case drain needed Wire protection kit under deck Grease filled bearing drive housing Fits to Mini Excavators: 10,000lb to 19,000lb Has Kubota mount for KX040, KX057, KX080 Weighs 730lbs New price…$11,400 Used Price…$8,000  

View Listing
Blue Diamond Mini Skid Steer Brush Cutter 50″ wide model sale price…$8,000 3 Blades, Direct drive thru bearing housing Turns clockwise and counterclockwise, 80CC Motor, 13-20GPM, Universal Mini Mount Weights 770lbs, With hoses and couplers, other sizes available $110
  • 110 /Daily
  • 330 /Weekly
  • 990 /monthly

50″ wide model sale price…$8,000 3 Blades, Direct drive thru bearing housing Turns clockwise and counterclockwise, 80CC Motor, 13-20GPM, Universal Mini Mount Weights 770lbs, With hoses and couplers, other sizes available

View Listing
Used 22 Blue Diamond 72″ Pickup Broom #UA22102 Stock #UA22102, Sale Price $7,500 Series 2 Premium pick-up broom Heavy 2″ main shaft, oversized 6″ bearings, 7″ tall front “crash” bar Easy adjustments! No tools required. 26″ Diameter Poly / Steel bristle mix Flow Range – 15-25 GPM Sale price……$7,500 Available new for $13,600 $150
  • 150 /Daily
  • 450 /Weekly
  • 1350 /monthly

Stock #UA22102, Sale Price $7,500 Series 2 Premium pick-up broom Heavy 2″ main shaft, oversized 6″ bearings, 7″ tall front “crash” bar Easy adjustments! No tools required. 26″ Diameter Poly / Steel bristle mix Flow Range – 15-25 GPM Sale price……$7,500 Available new for $13,600

View Listing
Severe Duty Root Grapples Blue Diamond Severe Duty Root Grapples, Dual cylinder, Dual top clamps, 1/2″ AR36 Steel top and bottom tines, Heavy Duty Cylinders with cylinder protectors, One Piece Tines, Solid QA Area No Pinch Hose Routing Reinforced Top Clamps 66″ Root Grapple : $6,600.00 72″ Root Grapple : $6,700.00 78″ Root Grapple : $6,800.00 84″ Root Grapple : $6,900.00 $80
  • 80 /Daily
  • 240 /Weekly
  • 720 /monthly

Blue Diamond Severe Duty Root Grapples, Dual cylinder, Dual top clamps, 1/2″ AR36 Steel top and bottom tines, Heavy Duty Cylinders with cylinder protectors, One Piece Tines, Solid QA Area No Pinch Hose Routing Reinforced Top Clamps 66″ Root Grapple : $6,600.00 72″ Root Grapple : $6,700.00 78″ Root Grapple : $6,800.00 84″ Root Grapple : $6,900.00

View Listing
18 Cat LT18B Tiller #UA22016 Stock # UA22016 72” wide tilling width, Standard flow  (11-22GPM) Weighs 930 lbs   $150
  • 150 /Daily
  • 450 /Weekly
  • 1350 /monthly

Stock # UA22016 72” wide tilling width, Standard flow  (11-22GPM) Weighs 930 lbs  

View Listing
Pemberton Wheel Loader Forks #UA20023 Stock #UA20023, Sale Price $5,900 Cat / Balderson Quick Coupler mount, Fork tines are 6” X 2.5” X 95” long, Carriage is 100” wide, Attachment weighs: 2,300lbs Fits to Cat Wheel loaders with Balderson Q/C:  926G, 928G, 938G, 950G, and more $150
  • 150 /Daily
  • 450 /Weekly
  • 1350 /monthly

Stock #UA20023, Sale Price $5,900 Cat / Balderson Quick Coupler mount, Fork tines are 6” X 2.5” X 95” long, Carriage is 100” wide, Attachment weighs: 2,300lbs Fits to Cat Wheel loaders with Balderson Q/C:  926G, 928G, 938G, 950G, and more

View Listing
Used Bobcat SC48 48” Soil conditioner / power rake #UA22066 Stock #UA22066, Sale Price $5,500 Fits to Bobcat mini skids steers, MT55, MT85, MT100 and S70 full size skid steer, 48” wide drum, Manual angle left and right, 10 to 18GPM hyd flow, Weighs : 600lbs $150
  • 150 /Daily
  • 450 /Weekly
  • 1350 /monthly

Stock #UA22066, Sale Price $5,500 Fits to Bobcat mini skids steers, MT55, MT85, MT100 and S70 full size skid steer, 48” wide drum, Manual angle left and right, 10 to 18GPM hyd flow, Weighs : 600lbs

View Listing
13 Bobcat HB680 #UA22095 Stock #UA22095, Sale Price $5,500 150lb Class hammer / breaker With Bobcat MT mini mount Fits to Bobcat MT55, MT85, MT100, and Bobcat S70 Skid steers Weighs 250lbs $150
  • 150 /Daily
  • 450 /Weekly
  • 1350 /monthly

Stock #UA22095, Sale Price $5,500 150lb Class hammer / breaker With Bobcat MT mini mount Fits to Bobcat MT55, MT85, MT100, and Bobcat S70 Skid steers Weighs 250lbs

View Listing
Used 2022 Blue Diamond Log Splitter #UA22106 Stock #UA22106, Sale Price $5,300 35 ton Capacity, Inverted design, 2 way wedge , Very heavy-duty sliders Opens to 30″ Weighs 950LBS Fits to all skid steers, Available new for $6,300 Used sale price…………..$5,300 $125
  • 125 /Daily
  • 375 /Weekly
  • 1125 /monthly

Stock #UA22106, Sale Price $5,300 35 ton Capacity, Inverted design, 2 way wedge , Very heavy-duty sliders Opens to 30″ Weighs 950LBS Fits to all skid steers, Available new for $6,300 Used sale price…………..$5,300

View Listing
Bobcat 10 Dumping Hopper #UA23016 Stock #UA23016, Sale Price $5,000 Fits to all skid steer loaders, 1.1yard heaped capacity, .95yard struck capacity, Over all dimensions: 45” X 84”, Hopper is 36” wide, $150
  • 150 /Daily
  • 450 /Weekly
  • 1350 /monthly

Stock #UA23016, Sale Price $5,000 Fits to all skid steer loaders, 1.1yard heaped capacity, .95yard struck capacity, Over all dimensions: 45” X 84”, Hopper is 36” wide,

View Listing
Blue Diamond Mini Sweeper Stock# UA21095,  sale price $4,500 48” wide, Manual angle, Poly Bristles Fits to Vermeer, Ditch Witch , Toro and other mini skid steers, Weighs 646lbs   $100
  • 100 /Daily
  • 300 /Weekly
  • 900 /monthly

Stock# UA21095,  sale price $4,500 48” wide, Manual angle, Poly Bristles Fits to Vermeer, Ditch Witch , Toro and other mini skid steers, Weighs 646lbs  

View Listing
Blue Diamond EX4 Auger drive Blue Diamond EX4 Extreme Duty Series 2 Auger Torque ft-lbs @ 3000 Psi….3275 Max Torque ft-lbs 3500 Psi….3821 Recommended Flow (GPM)…..10-30 Peak Efficiency (GPM)…..19-23 Motor Type…….Eaton Max Pressure – Do Not Exceed………..3500 psi @ 16 gpm Max Flow – Do Not Exceed……30 gpm @ 1800 psi Standard Output Shaft……..2″ Hex Max Drilling Diameter Clay/Shale…..24” Max Drilling Diameter Earth……….30” Weight….123lbs Compact high torque manufactured gearbox 2 piece shaft design ensuring maximum side load ratings 5-yr gearbox warranty, 3-yr motor warranty, and lifetime shaft pull-out warranty $90
  • 90 /Daily
  • 270 /Weekly
  • 840 /monthly

Blue Diamond EX4 Extreme Duty Series 2 Auger Torque ft-lbs @ 3000 Psi….3275 Max Torque ft-lbs 3500 Psi….3821 Recommended Flow (GPM)…..10-30 Peak Efficiency (GPM)…..19-23 Motor Type…….Eaton Max Pressure – Do Not Exceed………..3500 psi @ 16 gpm Max Flow – Do Not Exceed……30 gpm @ 1800 psi Standard Output Shaft……..2″ Hex Max Drilling Diameter Clay/Shale…..24” Max Drilling Diameter Earth……….30” Weight….123lbs Compact high torque manufactured gearbox 2 piece shaft design ensuring maximum side load ratings 5-yr gearbox warranty, 3-yr motor warranty, and lifetime shaft pull-out warranty

View Listing
13 Bobcat 74″ Bucket Grapple #UA22037 Stock #UA22037, Sale Price $3,900 74” wide Extreme duty series, Dual cylinder, Additional bolt on cutting edge, Weighs 960lbs, Other styles and sizes available new or used, $80
  • 80 /Daily
  • 240 /Weekly
  • 720 /monthly

Stock #UA22037, Sale Price $3,900 74” wide Extreme duty series, Dual cylinder, Additional bolt on cutting edge, Weighs 960lbs, Other styles and sizes available new or used,

View Listing
Blue Diamond HD Tree Puller Blue Diamond Tree / Post Puller Enclosed Single Cylinder, Heavily Gusseted Quick Attach Mount Four Rows of Teeth Opens to 11″ Weighs: 415 lbs. Great for removing posts or small trees / shrubs with minimal ground disturbance! $80
  • 80 /Daily
  • 240 /Weekly
  • 720 /monthly

Blue Diamond Tree / Post Puller Enclosed Single Cylinder, Heavily Gusseted Quick Attach Mount Four Rows of Teeth Opens to 11″ Weighs: 415 lbs. Great for removing posts or small trees / shrubs with minimal ground disturbance!

View Listing
2019 Bobcat Mini Grapple   36” wide, Single cylinder, Weighs 360lbs, Ref #22021   $80
  • 80 /Daily
  • 240 /Weekly
  • 720 /monthly

  36” wide, Single cylinder, Weighs 360lbs, Ref #22021  

View Listing
Severe Duty Stump bucket Weight: 443 lbs. Replaceable HD bucket teeth, 4″ square tube Formed bottom with 1″ x 8″ cutting edge $60
  • 60 /Daily
  • 180 /Weekly
  • 540 /monthly

Weight: 443 lbs. Replaceable HD bucket teeth, 4″ square tube Formed bottom with 1″ x 8″ cutting edge

View Listing
Used Bobcat Mini Forks #UA22096 Stock #UA22096, Sale Price $1,000 36” long fork tines, With Bobcat MT mini mount Fits to Bobcat MT55, MT85, MT100, and Bobcat S70 Skid steers $60
  • 60 /Daily
  • 180 /Weekly
  • 540 /monthly

Stock #UA22096, Sale Price $1,000 36” long fork tines, With Bobcat MT mini mount Fits to Bobcat MT55, MT85, MT100, and Bobcat S70 Skid steers

View Listing

Our Office

833-416-9318 Monday – Friday, 8am – 5pm

210.251.1107 - After Hours Rental Service

sales@southernplainseq.com

5410 Rittiman Road, San Antonio, TX 78218

Contact Us

This field is for validation purposes and should be left unchanged.

MENU